Skip to main content

AC3 audio problem in MX Player

Due to some licensing issues, many loyal users of what's arguably the best video player for Android sooner or later find out that the sound in the movies they just loaded for that long-haul flight wouldn't play in MX Player. 

We are talking AC3, MLP, DTS or Dolby here, which usually means that if you load a high-res, high-quality container with your favorite TV series, you might be unpleasantly surprised that the sound won't play mid-air, when you don't have access to the Play Store to get an alternative like VLC or KMPlayer. 
Moreover, why would you have to give up the amazing MX Player for such a small nuisance? The thing is, you don't, and here is what you have to do to restore full audio codec support with MX Player on your Android device, courtesy of XDA

Requirements: 1.Your phone must have atleast 40-50% of battery and USB Drivers
                         2.Codec zip file
 
Basic Guide 

 1. Download the AIO 1.7.32 codec package zip, and transfer it to default Downloads folder on your Android phone or tablet. This all-in-one package contains the codec versions for hardware decoders there are - Arm v7-Neon, Arm v7-Tegra3, Arm v7-Tegra2, Arm v6 VFP, Arm v6, Arm v5TE, x86, MIPS - preventing you from trying to determine which one you have on your gear;

2. Fire up MX Player, and go to Settings>Decoder>Custom codec (scroll to the end of the list for that one);

3. Point the basic file browser to the aio.1.7.32 zip file you just placed in the Downloads or another folder of choice;

4. The MX Player will automatically pick the right codec for your device, and restart itself to finish the process;

5. If you want to check if the codec pack has definitely been set as default, go to the three context menu dots up right, choose Help>About, and you should see it reading "Custom codec 1.7.32" - this way you will know that the right codec has been installed properly for sure. If for some reason sound doesn't play, check the Settings>Decoder options, and set it to "Use H/W+ decoder" or "H/W+ audio on S/W video," if you have set software video decoding previously for some reason;

6. That's it, you can now play any video file with sound on your beloved MX Player. Enjoy.

source: (XDA-Devs)


Download : - Codec Aio.zip 

Video Tutorial


Comments

Popular posts from this blog

TWRP Recovery

One of the questions that often comes up at www.chinaphonearena.com is ‘how to make TWRP?’. TWRP is a custom touch recovery similar to CWM, but with more functions than CWM

In this how to make TWRP tutorial, I will show you how to make a TWRP recovery on an already rooted phone.

What you will need

1. MTK mobile
2. A USB cable
3. A PC
4. The Easy Ultimate TWRP installer ( Download )

Stage 1: Preparation

Some of these may or may not be required depending on what you have done so far. If you have:

1. USB debugging enabled
2. ADB drivers installed on PC
3. Have stock firmware or a flash tool backup of your phone available
4. Are rooted already
5. NVRAM backed up

Then you can skip the following steps and head to the next stage. If any of these steps have not been completed, please see the following steps.

1. Enable USB debugging on your MTK mobile phone
2. Install ADB drivers on your PC if not already installed. This step is required so that your PC can communicate with your mobile phone. I recommend PDAN…

How to use SP tool

SP flashtool is an application which is mainly help you to flash Stock ROM, Custom recovery and fixing in some extreme cases ( firmware update, Flash recovery, unbrick bricked android device etc.).  SmartPhone FlashTool is working with MediaTek Android smartphones (MTK based) You can Download SPFlashTool from our download section. You need to load scatter file for MTK based device for functioning.

Requirements:Your phone must have atleast 40-50% of battery and USB Drivers
Now let’s explore the steps

Basic Guide for SP-Flash-Tools


Download and unzip the package , Open SPFLASHTOOL EXE and Load the Scatter file ( Click Scatter Loading)Uncheck all the boxesGo to / click RECOVERY box from list and load recovery image according to your device/choice ( load image from the separate window -->open)Now you can see RECOVERY box is checked and you can see the recovery image location ( uncheck all other boxes)Switch off your deviceConnect your device and Click DOWNLOAD "button" on top ( n…